When you decide you are going to start building deck railings, there are many options and designs that are available. They can be attached to the existing post that was used for your deck and if per planned, you can let your deck post run to the height you need for your railings, or you can attach them to the outside joist or joist extensions. This provides a good sturdy post and adds safety to your railing. You can add intermittent post or spaces between the main support posts.

Pick the height you require and attach the top railing to the post you have installed. It doesnÂ’t matter how long the railing runs because it can be very easily trimmed off after you get all your railings in place. Now you can add the rail caps of your choice to the top to give your railing a nice finished look. At this time you can add spindles or a designed board of your choice between the posts, which will add attractiveness to your deck.

Railings can be plain or made to look very elegant. The market offers a wide variety of plans and designs, which you can find at your local hardware store. So go ahead and get creative - itÂ’s not as hard as you think. The market also offers pre - built railings, but the pride of making your own is the best.

When making your spindles, measure the board to make sure your spindle will fit the height you have chosen, mark out your design and start cutting, fitting each railing as you go. Counter sinking your nails on top railing before the railing cap is attached can attach these. Doing this will hide your nail heads.

When making railings always think of the safety of them. Make sure they are firmly attached and well bolted or nailed. Railings that are done properly can add to the look of your deck and depending how fancy you make them can be a tremendous source of pride that sits outside for everyone to see.