Click for homepage
 

Planning a Home Painting Project

Have you ever attempted some DIY and made a real mess of it? A professional dissertator will tell you that the secret is in the preparing. If you prepare well, the project will run smoothly. If you fail to prepare well, the job will just get harder and more stressful. Here is our expert advice on preparing a room for painting.

Time to complete job: Preparing a room for a new coat of paint or paper will take at least half a day, including filling and smoothing old plaster.

Approximate budget: The basic tools and materials should cost less than �20 for most rooms.

You will need:
Sugar soap
Bucket and sponge
Rubber gloves
Interior plaster filler
Decorator's sealant
Filling knife
Sanding block or electric sander
Dust sheets
Step ladder
Dust mask

Tip: Before to begin, always protect yourself by using a dust mask and your floor by laying down dust sheets.

Step 1: Smoothing the surface Scrape off any flaking paint with a flexible filling knife and smooth the surface with a sanding block. For more tips on stripping back paint, see Paint Stripping. If there is wallpaper on the walls this will need removing. For tips on doing this, see Stripping Wallpaper.

Step 2: Repairing damaged plaster Sometimes patches of old plaster become loose or cracked. Pick out the loose areas with your filling knife and repair the areas with plaster filler. Work methodically over the whole room to make sure you have treated all the damaged areas. When the filler is dry, use an electric sander or sanding block to smooth any rough areas of plaster and blend in the new repairs. Very powdery plasterwork or new bare plaster should be coated with a coat of plaster sealer. Depending on the size that requires repairing, you may need to patch it up. Patching up plaster is beyond the scope of this article but detail of how to do this can be found on the UKTV website. Tip: Cracks around the skirting boards and door frames will spoil your new finish. Rake out any chipped paint and fill the gaps with a flexible decorator's sealant.

Step 3: Cleaning Wash off any black mould with a solution of household bleach and leave to dry. Heavy mould or tobacco stains should be covered with a sealer coat of Anti-Damp Paint. Tip: It's essential to treat the cause of mould and damp patches before redecorating.

Step 4: Make a judgement call as to whether the esposed walls need to be covered with lining paper. If the walls have large repair patches or lots of tiny hairline cracks, covering with plain lining paper will provide a smooth base for paint or wallpaper. Hand this paper in the same that that you would hand regular wallpaper and then allow this paper to dry thoroughly over night. For more tips, see Wallpapering. Finally, remove any dirt and grease with sugar soap or hot water and washing-up liquid. Don't forget to wash the ceiling as well if it's going to be decorated.


------

UKTV's DIY Guides are a wealth of free information that you can count on to help you turn your dome into a nicer place to live.
This article is free for republishing
Source: http://www.articlealley.com/article_168416_27.html

 

 
 
Copyright © 2005-2007 ARCH Business Ventures ® Ltd - All Rights Reserved